форум kia ceed

Вопросы эксплуатации => kia ceed, kia ceed fl (2007-2011) => Тема начата: neydiadresim от Февраль 04, 2014, 00:01:52 am

Название: central door locking problem, please help me!
Отправлено: neydiadresim от Февраль 04, 2014, 00:01:52 am
Hi everyone.

There is a problem with my car's central door locking system.

Before the problem occured, I used to open the door with the remote then open the driver side door. In this case the doors would never automatically locked.

But now, I open the door with the remote, then open the driver side door, I get into the car, If I don't insert the key into the ignition in 30 seconds, all the doors automatically lock.
Or, if I press the central lock button on the dashboard when any of the doors is open, all the door lock. But before the problem occured, it would unlock.

What I want to learn is how I can reset the car's door locking system.

By the way, my car is kia ceed 2011 motion diesel manual transmission.

Thanks in advance
Kalender from Turkiye
Название: Re: central door locking problem, please help me!
Отправлено: NEZNAIKIN75 от Февраль 04, 2014, 00:26:03 am
на машине автозапуск  by car alarm with auto start?
Название: Re: central door locking problem, please help me!
Отправлено: neydiadresim от Февраль 04, 2014, 00:31:26 am
Can you write it in English please!

Google translator does not translate properly.

Thanks
Название: Re: central door locking problem, please help me!
Отправлено: G.Zilberstein от Февраль 04, 2014, 00:45:30 am
My opinion is: this problem with limit switch on the drivers door(sensor of door opening). Switch is allways closed. Sorry for my bad english 
Название: Re: central door locking problem, please help me!
Отправлено: NEZNAIKIN75 от Февраль 04, 2014, 00:54:53 am
не работает датчик открытия двери the sensor open the door
Название: Re: central door locking problem, please help me!
Отправлено: neydiadresim от Февраль 05, 2014, 02:00:08 am
My opinion is: this problem with limit switch on the drivers door(sensor of door opening). Switch is allways closed. Sorry for my bad english 

Thanks for the inspiration.
The problem is solved.

One of the legs of 4-legged copper plate inside the door switch was broken. It was soldered to the main part, then that is all.